Siemens Gigaset C590 IP - Page 20

19
First steps
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / starting.fm / 22.12.10
Version 4, 16.09.2005
1. Connecting the phone and power cables to the base
1 Insert the phone cable (TAE connection cable with RJ11 plug) into the lower
connection socket at the rear of the base.
2 Insert the power cable of the power adapter into the upper connection socket
at the rear of the base.
3 Push both cables into the appropriate cable channels.
3
2
1
3
Back panel
of the base
Warning
Use only the power and telephone cables supplied. Pin connections on tele-
phone cables can vary (pin connections
¢ page 196).