Siemens Gigaset CL100 - Function that is set after the next call; Using the network mailbox

13
Using the network mailbox
Gigaset CL100 / Irland_UK engl / A31008-A221-B101-1-7619 / telephony.fm / 06.11.2003
Function that is set after the next call
Before you carry out the procedure, press: MENU; s SEL SERVICES OK.
Using the network mailbox
The "T-NetBox" network mailbox is the answering machine in the network operated by
Deutsche Telekom ("T-Net").
You cannot use the network mailbox unless you have applied to Deutsche Telekom.
Configuring the network mailbox for fast access
You have the option of calling the network mailbox by pressing 1 (speed dial). To do
this, you must first enter the phone number of the network mailbox.
MENU ¢ MAILBOX ¢ SET KEY 1 ¢ Enter the phone number of the network mailbox
¢ OK
Press a and hold (return to idle status).
Calling the network mailbox
Press 1 and hold. This connects you directly to the network mailbox.
Viewing a message from the network mailbox
When a message arrives for you, you will receive a call from the network mailbox. If you
have requested Calling Line Identification, the display shows the number 0800 330
2424. If you accept the call, the new messages are played back. If you do not accept the
call, the number of the network- mailbox will be stored in the list of missed calls and the
letter symbol flashes (page 16).
With one caller: MENU;
s END CONF OK
s (switch to caller if necessary)
MENU;
s END CALL OK
With both callers:
a
Accept waiting call: MENU; ACCEPT OK
Reject call waiting: MENU;
sREJECT OK
Cancel callback: s RINGBACK OFF OK