EasyManua.ls Logo

Siemens Gigaset CL100 - Power consumption; General technical data

Siemens Gigaset CL100
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Appendix
Gigaset CL100 / Irland_UK engl / A31008-A221-B101-1-7619 / appendix.fm / 06.11.2003
Power consumption
In standby mode (without charging) approx. 1.9 watts.
In standby mode while charging approx. 4.6 watts.
During a call approx. 2.1 watts.
General technical data
Feature Value
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency range 1880 – 1900 MHz
Duplex method Time multiplex, 10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power per channel
Range up to 300 m outdoors, up to 50 m indoors
Power supply Base station 220/230 V ~/50 Hz
Environmental conditions for operation +5 °C to +45 °C;
20% to 75% relative humidity
Dialling mode DTMF (tone dialling)/DP (dial pulsing)
Flash time 250 ms
Dimensions/Base station 115 x 102 x 105 mm (W x L x H)
Dimensions/Handset 55 x 152 x 30 mm (W × L × H)
Weight Base station 138 g; handset with batteries 117 g

Table of Contents

Related product manuals