18
Operating more than one handset
Gigaset CL100 / Irland_UK engl / A31008-A221-B101-1-7619 / registration.fm / 06.11.2003
Operating more than one handset
Internal calls, ending a call
Internal calls between handsets on the same base station are free of charge.
Calling a specific handset
INT ¢ Select handset ¢ Press talk c key or: INT 2 (example)
To end the call: Press the end call key a.
Calling all handsets (group call)
Press INT and P. To end the call: Press the end call key a.
Forwarding a call to another handset
INT ¢ Select handset ¢ Press talk key c
The internal user answers: Press end call key
a.
Internal enquiry calls
You can make an internal call while an external call is in progress.
INT ¢ Select handset ¢ Press talk key c
To
end the call: MENU ¢ GO BACK ¢ OK (back to the outside caller)
Accepting/rejecting a waiting call during an internal call
If you get an external call while conducting an internal call, you will hear the call
waiting tone (short tone).
To accept the call: MENU ¢ ACCEPT ¢ OK
(you speak to the outside caller).
To reject the call: MENU ¢ REJECT ¢ OK
(you speak to the internal caller).
The rejected call waiting tone can still be heard on other handsets.
Barging in on an external call
The BARGE IN function must be activated (default: deactivated).
An internal user conducts an external call. You can join this call uninvited and speak. The
barge-in is signalled to all participants in the call by a signal tone.
Activating/deactivating barge in
MENU ¢ BASE SET ¢ ADD FEATURES ¢ BARGE IN ¢ OK (‰ = On).
Press a and hold (return to idle status).
Barging in
LINE IN USE is shown on your handset display. Press the talk key c. All parties hear a
signal tone. Your handset display shows LISTENING IN.
End barge in: Press end call key
a (signal tone).
To Next Page
Loading...
