Siemens Gigaset CL100 - Using the directory and other lists; Directory and speed dial list; Dialling with the directory

14
Using the directory and other lists
Gigaset CL100 / Irland_UK engl / A31008-A221-B101-1-7619 / Directories.fm / 06.11.2003
Using the directory and other lists
Directory and speed dial list
Both lists are used in the same way, except that the h key is pressed to open the
directory and the
C key to open the speed dial list.
You can save up to 20 phone numbers and names in the directory
h. This makes
dialling easier.
The speed dial list is a special directory in which you can store up to 10 particularly
important numbers, e.g. the prefixes of network providers ("call-by-call numbers").
Saving phone numbers in the directory/speed dial list
h or C ¢ MENU ¢ NEW ENTRY
Dialling with the directory
[______]
OK
Enter and confirm phone number (directory
max. 22 digits, speed dial list max. 12 digits).
[______]
OK
Enter a name (up to 12 characters)
(text entry page 25) and confirm.
a
Long press (back to idle status).
i
If your phone is connected to a PABX that requires a prefix (e.g. "0") for an
outside line, then you must save this prefix number as the first digit in all
your directory entries.
h
Open the directory.
Enter the first letter of the name. Example: with the
name Emma (first letter "E") press the I key twice.
The first name with "E" is displayed.
If there is more than one entry starting with "E",
select the name you want.
c
Press the talk key. The number is dialled.