23
Gigaset DX800A all in one / UK / A31008-N3100-L101-2-7643 / web_server.fm / 28.3.11
Version 6, 21.08.2008
Or:
¤ Click the Cancel button to reject the changes you have made.
This returns you to the list of connections.
Activating/deactivating the Gigaset.net connection
¤ In the list of connections in the Gigaset.net area: Use the option in the Active
column to activate ( ) or deactivate ( ) the Gigaset.net connection.
Configuring the VoIP connection
¤ Open the Settings ¢ Telephony ¢ Connections Web page.
¤ Select the Edit button next to the VoIP connection that you want to configure or
the configuration you wish to change.
This will open a Web page where you can make the settings that your phone needs
to access your provider's VoIP server.
The Web page always displays the following areas:
u IP Connection (¢ page 24),
u Auto Configuration (¢ page 24)
u Profile Download (¢ page 25)
u Personal Provider Data (¢ page 26).
The areas
u General data of your service provider and (¢ page 26)
u Network data for your service provider (¢ page 27)
can be shown and hidden by selecting the Show Advanced Settings and Hide
Advanced Settings buttons.
You must enter the VoIP provider's general access data in these areas. You can
download this data from the Internet for several VoIP providers (
¢ "Profile Down-
load area", page 25).
¤ Make the settings on the Web page.
¤ Save them in the phone (¢ page 22).
¤ Activate the connection if necessary (¢ page 30).
Please note
If you do not use your Gigaset.net connection for six months, it is automatically
deactivated. You cannot be reached for calls from Gigaset.net.
The connection is reactivated:
u As soon as you start a search in the Gigaset.net directory
u make a call via Gigaset.net, i.e., dial a number ending in #9 (two attempts
may be necessary) or
u activate the connection via the Web configurator as described above.
To Next Page
Loading...
