Siemens Gigaset DX800A all in one - Management - Save & Restore; Saving and Restoring System Settings; Saving the Settings for the Base on Your PC; Loading the Settings from a File on the PC to the Base

62
Gigaset DX800A all in one / UK / A31008-N3100-L101-2-7643 / web_server.fm / 28.3.11
Version 6, 21.08.2008
Management – Save & Restore:
Saving and restoring system settings
After configuring your base, you can save the current settings in a file on your PC.
The file will then contain, for example:
u The settings for the local network (IP configuration), ¢ page 14
u The active phone numbers/connections, ¢ page 17
u The assignment of send and receive connections, ¢ page 35
u Your own local area code and access code, ¢ page 42
u Network mailbox number, ¢ page 47
u The info services settings, ¢ page 54
u The settings for synchronisation with a time server, ¢ page 59
u The ECO DECT settings, ¢ page 61
u The settings for ringer melodies and volume levels
If you change the settings accidentally or you need to reset the base due to a fault,
you can reload the saved settings from the file on your PC to your phone.
¤ Open the Settings ¢ Management ¢ Save & Restore Web page.
Saving the settings for the base on your PC
In the Save device settings to PC area:
¤ Click the Save button next to Save settings.
The base will create a file Gigaset-yyyy-mm-dd.cfg (default name; yyyy = year
4-digit format, mm = month 2-digit, dd = day 2-digit) with the configuration
data.
¤ A browser-specific dialogue box appears where you can open/save the file.
Change the name, if necessary, and save the file on your PC.
Loading the settings from a file on the PC to the base
Prerequisite: There is a .cfg file with the settings for the base on your PC.
In the Reload device settings from PC area:
¤ In the Settings File field, enter the cfg file you want to load onto the base
(complete path name), or click Browse... and navigate your way to the file.
¤ Select Restore button to start the transfer.