43
Gigaset DX800A all in one / UK / A31008-N3100-L101-2-7643 / web_server.fm / 28.3.11
Version 6, 21.08.2008
Telephony – Dialling Plans:
Activating/deactivating area code pre-dialling
Prerequisite: You must have saved your own area code in the base (¢ page 42).
In general, you must always dial the area code for calls via VoIP connections – even
for local calls. You can avoid having to dial the area code for local calls by setting
your phone to automatically prefix this code for all VoIP calls made in the same
local area.
For calls made via VoIP, the area code (
¢ page 42) entered is then prefixed to all
numbers that do not begin with 0 – even when dialling numbers from the directory
and other lists.
¤ Open the Settings ¢ Telephony ¢ Dialling Plans Web page.
Area Codes area
¤ Select Ye s after Predial area code for local calls via VoIP to activate the function.
Select No to deactivate the function. You will then need to enter the area code
for local calls made via VoIP. Numbers in the directory must always contain the
area code when dialling via VoIP.
Please note
u The area code will also be prefixed to VoIP calls made to emergency numbers
if there are no defined dialling plans for these numbers.
u The numbers of your network mailbox saved in the base are not prefixed
with a code (
¢ page 47).
To Next Page
Loading...
