Siemens Gigaset S685 - Sending and Managing SMS; Composing, Sending, and Drafts

29
SMS (text messages)
Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / sms_BRD_neutral.fm / 26.9.08
Version 4, 16.09.2005
Sending an SMS
c Press the talk key
Or:
§Options§ Press the display key.
Send Select and press §OK§.
SMS Select and press §OK§.
~ / s / C
Select number with area code
(even if you are in that area)
from the directory or call-by-
call list, or enter number
directly. For SMS to an SMS
mailbox: add the mailbox ID to
the end of the number.
§Send§ Press the display key. The SMS
is sent.
Setting input language
¤ You are writing an SMS (page 28).
§Options§ Press the display key.
Select Language
Select and press
§OK§.
s Select input language and
press
§OK§.
a Press the end call key briefly
twice to return to the text
panel.
The input language setting only applies to
the current SMS.
SMS status report
Precondition: Your network provider sup-
ports this feature.
If you have activated the status report, you
will receive an SMS with a confirmation
message after sending.
Activating/deactivating a status report
v ¢ î ¢ Settings
Status Report
Select and press
§OK§ (=on).
Reading/deleting status report/saving
number to directory
¤ Open the incoming message list
(page 31) and then:
q Select SMS with the State OK or
State not OK status.
§Read§ Press the display key.
u Delete:
§Options§ Delete Entry §OK§.
u Save to directory:
§Options§ Copy to Directory §OK§.
u Delete entire list:
§Options§ Delete List §OK§.
Draft message list
You can save an SMS in the draft message
list and edit and send it later.
Saving an SMS in the draft message list
¤ You are writing an SMS (page 28).
§Options§ Press the display key.
Save Entry Select and press §OK§.
Opening the draft message list
v ¢ î ¢ (mailbox, mailbox PIN)
¢ Outgoing (3)
The first list entry is displayed, e.g.:
Please note:
– If you are interrupted by an external call
while writing an SMS, the text is automati-
cally saved in the draft message list.
– If the memory is full, or if the SMS function
on the base station is being used by
another handset, the operation is can-
celled. An appropriate message appears in
the display. Delete SMS messages you no
longer require or send the SMS later.
‰
1234567890
21.11.07 09:45