34
SMS (text messages)
Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / sms_BRD_neutral.fm / 26.9.08
Version 4, 16.09.2005
Sending an SMS through another SMS
centre
¤ Activate the SMS centre (2 to 4) as the
active send service centre.
¤ Send the SMS.
This setting only applies to the next SMS
to be sent. Thereafter, the setting returns
to Service Centr. 1.
SMS on a PABX
u You can only receive an SMS when the
Calling Line Identification is for-
warded to the extension of the PABX
(CLIP).The CLIP evaluation of the
number of the SMS centre happens in
your Gigaset.
u If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX, e.g. by
sending an SMS to your own number:
once with and once without the access
code.
u When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base station.
Activating/deactivating muting
for the first ringer tone
v Open menu.
N5O O
Press keys.
Q
§OK§ First ring audible.
Or:
§OK§ First ring muted.
Activating/deactivating the
SMS function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings which you have made for
sending and receiving SMS messages
(e.g. the call numbers of the SMS centres)
and the entries in the incoming and draft
message lists are saved even after you
turn off your phone.
v Open menu.
N5O2L
Enter the digits.
Q
§OK§ Deactivate SMS function.
Or:
§OK§ Activate SMS function (default
setting).
Please note:
Ask your service provider for details on how to
enter service numbers if you wish to use per-
sonal mailboxes (precondition: your service
provider supports this function).
To Next Page
Loading...
