12
Product overview
Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Product_intro.fm / 27.3.08
Schablone 2007_10_19
LEDs
The LEDs indicate the status of the Gigaset SE681 WiMAX and the current signal
strength.
Name LED Meaning
Power: power
supply
Lights up green The Gigaset SE681 WiMAX is powered cor-
rectly.
Does not light up The Gigaset SE681 WiMAX is not powered
correctly or the power supply has failed.
Online: active
connection
Lights up green The Gigaset SE681 WiMAX is registered with
a WiMAX network and ready for use.
Does not light up The Gigaset SE681 WiMAX is not registered
with a WiMAX network; it is not possible to
establish an Internet connection.
Flashes green The Gigaset SE681 WiMAX is establishing a
connection with a WiMAX network.
Lights up red The Gigaset SE681 WiMAX is not ready. Pos-
sible cause: device is overheating or faulty.
LAN: Ethernet
port
Lights up green Correct cable connection with a powered
connection partner.
Does not light up No or incorrect cable connection.
Flashes green Data transfer via the Ethernet port.
RSSI: signal
strength
0 to 4 LEDs light
up green
The LEDs on the Gigaset SE681 WiMAX help
you to position the antenna more easily. The
LEDs indicate the signal strength; the more
LEDs that light up, the better the signal
reception.
All 4 LEDs flash
green
The Gigaset SE681 WiMAX is being reset to
the factory settings; see "Returning the
Gigaset SE681 WiMAX to factory settings" on
page 19.
RSSI: signal strength
LAN: Ethernet port
Online: active connection
Power: power supply
To Next Page
Loading...
