16
Connecting the Gigaset SE681 WiMAX
Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Installation.fm / 27.3.08
Schablone 2007_10_19
Connecting the Gigaset SE681 WiMAX
Connect the Gigaset SE681 WiMAX in the following order:
1. If you use the Siemens outdoor antenna, have it installed by a radio and television
technician. Connect the antenna cable from outside to the Gigaset SE681 WiMAX.
2. Connect the PC to the Gigaset SE681 WiMAX.
3. Connect the Gigaset SE681 WiMAX to the mains power supply and switch all the
devices on.
Connecting the Siemens outdoor antenna
Connecting the PC
ì Plug the connector of the antenna
cable into the ANT WiMAX connector
on your Gigaset SE681 WiMAX. To
remove the antenna cable plug, push
the slider on the plug away from the
antenna socket and pull the plug out.
!
Use either the Ethernet cable that is supplied or a standard network cable
(CAT-5) to connect the device to the PC. It is not important whether the
Ethernet cable has straight or crossed wiring.
Always use a shielded Ethernet cable.
To Next Page
Loading...
