15
System requirements
Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Installation.fm / 27.3.08
Schablone 2007_10_19
Gigaset SE681 WiMAX with Siemens outdoor antenna
System requirements
To use the Gigaset SE681 WiMAX, the following requirements have to be fulfilled.
u You will need a PC that meets the following requirements:
– PC with a free LAN interface 10/100BaseT (network adapter). The network
adapter on the configuration PC must support one of the following modes:
10BaseT Full Duplex, 100BaseT Half Duplex, 100BaseT Full Duplex. The TCP/IP
protocol has to be set up on the PC (standard installation for Windows XP and
Windows Vista; if you are using a different Windows operating system, read the
separate instructions on network configuration, if necessary).
– A Web browser is installed on the configuration PC (e.g. Internet Explorer or
Mozilla Firefox).
u To access the Internet you will need to register your Gigaset SE681 WiMAX with a
WiMAX Internet provider.
i
When used with the antenna integrated into the device or the Siemens
outdoor antenna, the Gigaset SE681 WiMAX complies with the regula-
tions on limiting the effect of electromagnetic fields on the general
population.
PC with Gigaset SE681 WiMAX
WiMAX network
base station
To Next Page
Loading...
