40
Using the directory and lists
Gigaset SL400 / EN for Greek / A31008-M2103-T101-1-8U19 / direct_charges.fm / 08.03.2010
Version 4, 16.09.2005
Select the §View§ display key to access addi-
tional information, including for example
the number linked to the name. If you have
CNIP, then the name and town registered
with your network provider for this number
are displayed. If the name and town are not
shown, it means that the caller has not
requested Calling Line Identification or that
Calling Line Identification has been
restricted.
Select the
§Options§ display key to select the
following options:
Copy to Directory
Copy the number to the directory.
Delete Entry
Delete selected entry.
Delete All
Delete all entries.
When you quit the call lists, all entries are set
to the status "old", i.e., the next time you call
up the list, they will no longer be shown in
bold.
Opening lists with the
message key
Use the message key f to open the fol-
lowing list selection:
u Network mailbox, if your network pro-
vider supports this function and fast
access is set for the network mailbox
(
¢ page 51).
u Incoming SMS message list (¢ page 44)
If several mailboxes are set up
(
¢ page 47), several lists are displayed.
u Missed calls list
u Missed alarms list (¢ page 41)
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is pressed).
In idle state, the display shows an icon for
the new message:
The number of new entries is displayed
under the corresponding icon.
After pressing the message key f, you
can see all lists containing messages and the
network mailbox list.
Lists containing new messages are at the top
Icon New message...
Ã
...on the network mailbox
™
... in the Missed Calls list:
Ë
... in the SMS list
... in the Missed Alarms list:
Please note
If calls are saved in the network mailbox,
you will receive a message if the appro-
priate settings have been made (see your
network provider user guide).
To Next Page
Loading...
