Siemens Gigaset SL400 - Setting the display backlight; Activating;deactivating auto answer; Changing the handsfree;earpiece volume; Setting keypad illumination

65
Defining handset settings
Gigaset SL400 / EN for Greek / A31008-M2103-T101-1-8U19 / registr_sett.fm / 08.03.2010
Version 4, 16.09.2005
Setting the display backlight
Depending on whether or not the handset is
in the charger, you can activate or deactivate
the backlight. If it is activated, the display is
permanently dimmed.
If the display backlight is deactivated, it can
be reactivated by pressing any key. Digit
keys appear on the display for pre-dialling;
all other keys do not have any further func-
tions.
v
¢
Ï
¢Display + Keypad ¢Display
Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
§Save§ Press the display key.
Setting keypad illumination
The brightness of the keypad illumination
can be set to one of five levels.
v
¢
Ï
¢ Display + Keypad
¢ Keypad Illumination
The current setting is displayed.
¤ You can enter data in the following fields:
Brightness:
Select 1 (darkest) to 5 (brightest).
§Save§ Press the display key.
Activating/deactivating
auto answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
v
¢
Ï
¢ Telephony ¢ Auto Answer
§Change§ Press display key (³=on).
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
In idle state:
t Open the menu for setting the
call volume.
r Set the earpiece volume.
s Scroll to the Speaker line.
r Set the handsfree volume.
§Save§ Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t Press the control key to call up
the Handset Volume menu. Set
the earpiece or handsfree vol-
ume by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key
§Save§.
If t is assigned to another function, e.g., call
swap (
¢ page 33):
§Options§ Open menu.
Volume Select and press §OK§.
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
•
•