101
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Schablone 2005_05_02
Manual key entry
ì Select the Key type, Hex or ASCII.
.
If you select Hex, you can use the characters 0 to 9 and A to F.
– With a 64-bit encryption depth, the key is exactly 10 characters long.
An example of a valid key: 1234567ABC
– With a 128-bit encryption depth, the key is exactly 26 characters long.
An example of a valid key: 234567ABC8912345DEF1234567
If you select ASCII, you can use the characters 0 to 9, A to Z and a to z plus the special
characters in the ASCII character set.
– With a 64-bit encryption depth, the key is exactly 5 characters long.
An example of a valid key: GIGA1
– With a 128-bit encryption depth, the key is exactly 13 characters long.
An example of a valid key: GIGASET_SE551
ì Enter up to four keys in fields Key 1 to Key 4 and confirm these keys by entering
them again in fields Confirm key 1 to Confirm key 4.
ì Select one of the four keys as Default key.
To Next Page
Loading...
