Siemens Gigaset SX541 WLAN dsl - System Log

126
Administration and Status Information
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / admin_router.fm / 21.07.2005
Schablone 2005_05_02
System Log
The System Log is displayed in the Status – Device menu. It can give you important
information about the functioning of your device and possible problems. You can also
have this information transmitted automatically to a system log server.
ì In the Administration menu, select System Log to make the settings for the log.
ì Log level: Select how much information is to be contained in the system log. You
can choose between four levels:
– Critical: logs the most important information concerning possible problems in
the functioning of your device
– Debugging:complete and detailed information about all your device's functions
– Warning and Informational are intermediate levels.
ì System log server
– Activate this function if you require automatic transmission of your device's sys-
tem log to a system log server in your local network.
– Server address:
Enter the IP address for the system log server.
– Server port:
Enter the port of the system log server that is to be used to transmit the system
log.
ì Click OK to save and apply the changes.