56
Basic Setup Wizard
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Schablone 2005_05_02
ì Select how Internet sessions are to be established via Connection mode:
–Select Always on if the connection is to exist at all times when the Gigaset SX541
WLAN dsl is switched on.
–Select Connect on demand if applications such as a Web browser or an e-mail
program are to connect to the Internet automatically.
–In the Idle time before disconnect field, enter a period of time after which the
Internet connection is to be automatically ended if no data is transmitted (default
setting: 3 minutes).
You can deactivate this function by entering "0". This means that the connection
will continue to exist even if no data is transmitted. If you have a time-based tariff
this can cause high charges. In this case you should enter a value other than "0".
This time setting only applies to the Connect on request option.
–Select Connect manually if you always want to establish and end the connection
to the Internet manually. If you have a time-based tariff this will save you high
connection charges. How to establish a connection manually is described on
page 123.
ì Click Test Settings to check the Internet connection. The router will attempt to con-
nect to the Internet. Any Internet connection already in existence will be closed first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.
PPPoE pass-through
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 75.
ì Deactivate PPPoE pass-through if you do not wish to use this function.
ì When you have entered the data, click Next >.
Using UPnP (Universal Plug and Play)
PCs with UPnP (Universal Plug & Play) can offer their own network services and automat-
ically use services offered on the network. You can find detailed information about this
on page 73.
ì Activate UPnP if you wish to use this function.
ì Click Next >.
Please remember:
Connection to the Internet is only possible if you have entered all the data
for your Internet provider correctly.
Please remember:
This option can result in high connection charges if you have a time-based tariff.
Please remember:
You must set the option Always on if you want to operate Internet telephony.
To Next Page
Loading...
