5
Your new appliance
In this section, you will find information on
■ the control panel
■ the types of heating
■ the cooking compartment
■ accessories
■ automatic calibration
Control panel
Rotary selector
The rotary selector is used to alter the default values and set
values.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
Display
Shortly after switching off the appliance, the display switches to
the energy saving mode. The display gets darker.
The display is divided into different areas:
■ Status line
■ Progress indicator
■ Settings range
■ Rotation direction indicator
Status bar
The status bar is located at the top of the display. It shows the
clock, the selected operating mode, instructions, information
and the time-setting options that have been set.
Progress display
The progress display provides you with a quick overview of the
cooking time as it counts down. It appears as a line under the
status bar after the cooking time starts. The line begins on the
Control element Use
Main switch
‡
Switching the appliance on and off
Menu buttons
"
Selecting the type of heating
X
Selects a programme (see section: Automatic programmes)
l
Saves and calls up the memory function (see section: Memory)
s
Selects the cleaning aid and descaling function (see section: Care and cleaning)
Navigation buttons
¾¿
Moves left or right in the display. Modifications are saved
Rotary selector: Changes values for the clock, cooking time, weight etc.
Press the rotary selector to lock and unlock
Function buttons
0
Selects time-setting options (see section: Time-setting options)
@
Switches the childproof lock on and off (see section: Childproof lock)
±
If the appliance is switched on: calls up current information
If the appliance is switched off: selects basic settings (see section: Basic settings)
Start button start Starts cooking
Stop button stop Short press: stops cooking (pause)
Press and hold: ends cooking
To Next Page
Loading...
Need help?
General