12
Changing the basic settings
The Æ main oven has various basic settings. These settings
can be customised to suit your requirements.
The oven must be switched off.
1.Press and hold the 0 button for approx. 4 seconds.
The current basic setting for signal duration is shown in the
displays, e.g. c01 2 for selection 2.
2.Use the @ or A button to change the basic setting.
3.Confirm by pressing the 0 button.
The next basic setting is shown in the displays. You can scroll
through all levels with the
0 button and change the setting
with the
@ or A button.
4.To finish, press and hold the 0 button for approx. 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Automatic switch-off
The Æ main oven has an automatic switch-off function.
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated. The
oven stops heating. When this occurs, it is based on the set
temperature or grill setting.
The automatic switch-off function is
activated.
A signal sounds. F8 appears in the display. The oven stops
heating.
Turn the function selector to the off position. The oven is
switched off.
Remove automatic switch-off
To prevent the automatic switch-off activating when not wanted,
set a cooking time. The oven heats up until the cooking time
has expired.
Cleaning system
The cleaning system reheats the self-cleaning surfaces in the
cooking compartment.
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and dispels splashes from baking and
roasting while the oven is in operation. If these self-cleaning
surfaces in the oven no longer clean themselves adequately,
they can be regenerated with the cleaning system.
Cleaning levels for the Æ main oven
You can select three cleaning levels for the main oven.
Basic setting Selection 0 Selection 1 Selection 2 Selection 3
c00 Brightness of the display lighting - night medium* day
c01 Signal duration upon completion
of a cooking time or timer period
- approx. 10 seconds approx. 2 minutes* approx. 5 minutes
c02 Clock display only when in opera-
tion
always* - -
c03 Waiting time until a setting is
applied
- approx. 2 seconds approx. 5 seconds* approx. 10 seconds
c04 Self-cleaning ceiling and side
walls retrofitted
no yes* - -
c05 Telescopic shelves retrofitted no* yes - -
c06 Reset all values to the factory set-
tings
no* yes - -
* Factory setting
Level Degree of cleaning Cooking time
1 gentle approx. 45 minutes
2 medium approx. 1 hour
3 intensive approx. 1 hour,
15 minutes
To Next Page
Loading...
