Basic settings en
15
6.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down.
7.
Once the cooking time has elapsed, an audible sig-
nal sounds. The cooking time is at zero. The appli-
ance stops heating up and responds again as usual
outside of Sabbath mode.
‒ Press to switch the appliance off.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
14 Basic settings
You can configure the appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appli-
ance.
Clock Clock in 24-hour format.
Date – day Sets the current day
Date – month Sets the current month
Date – year Sets the current year
Signal tone Short cooking time
Medium cooking time
1
Long cooking time
Button tone Switched on
Switched off
1
Display brightness 5 settings
Clock display off
Digital
1
Lighting Off during operation
On during operation
1
Childproof lock Keylock only
1
Door lock + keylock
After switch-on Main menu
Types of heating
1
Dishes
Night-time dimming Switched off
1
Switched on
1
Factory setting (may vary according to model)
Basic setting Selection
Brand logo Display
1
Do not display
Fan run-on Recommended
1
Minimum
Telescopic rails Retrofitted
1
Not retrofitted
Sabbath mode Switched on
Switched off
1
Factory setting Reset
1
Factory setting (may vary according to model)
14.2 Changing the basic settings
1.
Press
.
2.
Press .
a The operating modes menu opens.
3.
Use the rotary selector to select the required operat-
ing mode "Settings".
4.
Press
to confirm.
a The first basic setting appears.
5.
Press
to switch between the different settings.
6.
Use the rotary selector to change the basic setting.
7.
Press .
a The display shows the changes "Save" or "Discard".
8.
Select the desired change using
or .
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
1.
Press
.
2.
Press to select "Discard".
a All your changes are discarded and not saved.
15 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
15.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
To Next Page
Loading...
Need help?
General