15
Changing the basic settings
Prerequisite: The oven must be switched off.
Have a look at the table containing the basic settings so that
you know what the numbers mean.
Example in the picture: changing the cooling fan run-on time
basic setting from medium to short.
1. Press and hold the
± button for approx. 4 seconds until ™‚
appears for the first basic setting and
ƒ for the preset value.
2. Press the
± button repeatedly until the required basic setting
appears.
3. Use the rotary selector to change the value of the basic
setting.
Function Basic setting Options
™‚
Audible signal after a time has elapsed
ƒ = 2 minutes ‚ = 10 seconds
ƒ = 2 minutes
„ = 5 minutes
™ƒ
Confirmation tone when a button is pressed.
‹ = off ‹ = off
‚ = on
™„
Brightness of the display lighting
ƒ = medium ‚ = night
ƒ = medium
„ = day
™…
Display clock when the oven is switched off
‚ = on ‹ = off*
* The clock is shown while the
residual heat is displayed.
‚ = on
™†
Oven light during operation
‚ = on ‹ = off
‚ = on
™‡
Continue operation when the oven door is closed
‚ = operation continues auto-
matically
‹ = continue operation with †
‚
= operation continues automati-
cally
™ˆ
Additional door lock for childproof lock
‹ = no ‹ = no
‚ = yes
™‰
Length of cooling fan run-on time
ƒ = medium ‚ = short
ƒ = medium
„ = long
… = very long
™Š
Self-cleaning ceiling and side panels are retrofitted
‹ = no ‹ = no
‚ = yes
™‚‹
Telescopic shelves are retrofitted
‹ = no ‹ = no
‚ = yes
™‚‚
Undo all changes and restore basic settings.
‹ = no ‹ = no
‚ = yes
™‚ƒ
Sabbath mode
‹ = no ‹ = no
‚ = yes
To Next Page
Loading...
