10
Cancelling operation
Press and hold the
† button until 3D hot air, 160 °C appears.
You can make new settings.
Calling up information
Press the
± button briefly. For any information, press the ±
button again briefly. Before the appliance is started, information
is displayed on the types of heating, shelf positions and
accessories. After the appliance is started, you can check the
heating temperature in the cooking compartment.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, meat
and game through to bakes and pre-prepared products. You
can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
1. Press the " button.
: 3D hot air, 160 °C are suggested in the display.
2. Turn the rotary selector anticlockwise to j Recommended
settings.
3. Move to the first food category with the ¿ button and select
the required category with the rotary selector.
Move to the next level with the ¿ button. Turn the rotary
selector to make the next selection. The setting for the
selected dish now appears.
4. Press the † button.
Appliance operation begins. You can see the suggested
x
cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
x 0:00. You can cancel the signal early by pressing the 0
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
0 button and move to the cooking time with the ¿
button. Change the cooking time using the rotary selector.
Press the
0 button.
Calling up information
Press the
± button briefly. For any information, press the ±
button again briefly.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
■ 3D hot air
■ Top/bottom heating
■ HydroBaking
■ Pizza setting
■ Intensive heat
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
c button to activate rapid heating. The c symbol
is displayed in the status bar. The temperature indicator bars
start filling in.
Rapid heating ends when all the bars are filled. You will hear a
short signal. The
c symbol goes out. Place your dish in the
cooking compartment.
Notes
■ Rapid heating is cancelled if you change the type of heating.
■ If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■ You can use the ± button to check the current cooking
compartment temperature during rapid heating.
■ To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
c button. The symbol goes out.
Time-setting options
You can call up the time-setting options menu by pressing
the 0 button. The following functions are available:
If the oven is switched off:
■ Setting the timer
■ Setting the clock
If the oven is switched on:
■ Setting the timer
■ Setting the cooking time
■ Setting a later end time
Setting the time-setting options in brief
1. Press the 0 button to open the menu.
2. Switch to the required function, using the ¾ or ¿ button. The
setting area is light, the text is dark.
3. Use the rotary selector to set the clock or cooking time.
4. Press the 0 button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
To Next Page
Loading...
