Siemens HiPath 1120 - Getting to Know Your OpenStage Phone; User Interface and Components

9
Call forwarding for MSN when the line
is busy
Activation
qjhg p external line wp MSN
Call forwarding - Busy, for MSN
Deactivation
rjhg w
Caller ID
(Trace)
qlh
Restriction for sending MSN
Activation
qlj
Restriction for sending MSN
Deactivation
rlj
Using Features provided by
a carrier over an ISDN Network
qidg p externo p ISDN code
Note 1:
For Korea the numbering plan changes as follows:
a) Access to the group of external lines is done with digit "9" instead of "0";
b) Calling an operator terminal is done with digit "0" instead of "9"
c) Group call pickup is done with sequence "*0" instead of "*57"
d) Recovery of a parked call is done with sequence "*57" instead of "*0"
Note 2:
Feature Codes can be changed with the HiPath 1100 Manager. An expert
should be consulted in this case.
Consultation
KBA.book Seite 9 Freitag, 26. Januar 2007 9:32 09