Siemens HiPath Series User Manual

Team and Executive/Secretary Functions With Trunk Keys
95
Step by Step
Select and confirm.
or
or
or
e or f or g Enter the code.
o Enter the destination number.
Confirm.
or
If available. Press the "Forward Line" key. (You have
stored the call forwarding type and destination on the
"Forward Line" key Æ Page 56.)
Deactivating call forwarding:
Press the key. The LED lights up.
Select and confirm.
or
ride Enter the code.
Press the trunk key you wish to use.
or
o Enter the number of the trunk key you wish to use.
or
If available. Press the "Forward Line" key.
Meaning of LED Indications on the "Forward Line"
Keys:
The LED on the "Forward Line" key is off - call forwarding
is not active for this trunk.
or
LED on the "Forward Line" key is lit - call forwarding is
active for this trunk.
or
LED on the "Forward Line" key is flashing slowly - the
trunk is a call forwarding destination.
1=all calls?
2=external calls only?
3=internal calls only?
US: Save?
UK: Save entry?
Program/Service
#501=Forward Line: Off?
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.

Siemens HiPath Series Specifications

General

Brand	Siemens
Model	HiPath Series
Category	Telephone
Language	English