en Childproof lock
18
3. Confirm with the Start/Stop button.
The oven is in standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the 0 button.
Correcting the end time
This is possible if the oven is in standby. Use the 0
button to open the time-setting options menu, touch
"End y" and use the rotary selector to correct the end
time. Press the 0 button to close the menu.
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the 0 button.
Touch "End y" and reset the End time using the rotary
selector. The cooking time immediately starts to count
down.
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the / button for approx. 4
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
The appliance door is locked
In the basic settings, you can change the settings so
that the appliance door is also locked in addition to the
control panel.
The appliance door locks if the temperature in the
cooking compartment reaches approx. 50 °C. The H
symbol is displayed in the status bar. When the oven is
switched off, the appliance door locks immediately if the
childproof lock has been activated.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
1. Press the On/Off button.
2. Press the menu button.
The operating modes menu opens.
3. Select the "Settings" operating mode.
The first basic setting appears and can be changed
using the rotary selector.
4. Touch the ¿ arrow.
5. Use the rotary selector to change the values.
6. Use the ¿ arrow to switch to the next basic settings.
7. Press the menu button to save.
"Save" or "Discard" appears on the display.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
&
'KRWDLU
ꑗ$SSOLDQFHVWDUWVLQ KPLQ
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
Audible signal duration Short (30 s)
Medium (1 m)
Long (5 m)
Button tone Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
Display brightness Can be adjusted to one of five different
levels
Clock display Digital with date
Analogue
Off
Lighting On during operation
Off during operation
Continue automatically When closing the door
Do not continue automatically (press the
Stop/Start button)
Childproof lock Door lock + button lock
Button lock only
To Next Page
Loading...
Need help?
General