en Dishes
28
Select a cooking method that contains the following
value:
¡ To the exact degree
You can adjust the temperature and the core temperat-
ure.
→"Meat probe", Page25
Dishes with steam
For some dishes, you can select a cooking method
with steam . The food is cooked gently.
Select a cooking method with the following values for
cooking with added steam:
¡ Tender and juicy
Tender and crispy
¡ Juicy
Juicy and light
¡ Extra light
Extra light and glossy
¡ Glossy and crispy
Golden and crispy
¡ As if freshly baked
As if freshly cooked
¡ Gentle
Observe the information on operating with steam.
→"Steaming", Page20
Dishes with microwave
For some dishes, you can select a cooking method
with microwave . The cooking time is reduced.
Select a cooking method with the following values:
¡ Faster
¡ Cooked gently and quickly
Observe the information on operating with microwave.
→"Microwave", Page22
Individual browning
For some dishes, you can set the individual browning
of your meal.
The browning sensor uses the camera in the cooking
compartment to monitor the cooking process, and the
appliance ends the operation once the set level of
browning is reached.
To use individual browning, activate the camera in the
basic settings and connect your appliance to
HomeConnect.
→"Basic settings", Page30
Notes
¡ To obtain sharp images for the browning sensor
and to achieve consistently good results when
browning your food, regularly check the camera
lens and light for dirt and, if required, clean it.
→"Cleaning the appliance", Page35
¡ In order to measure the level of browning, the appli-
ance captures an initial photo of the food when the
operation starts. Only start the operation when the
food is in the cooking compartment.
¡ The most suitable foods are those whose level of
browning significantly changes during cooking, e.g.
light-coloured bread rolls.
¡ After starting the operation, you should no longer
change the food or its position in the cooking com-
partment.
¡ Depending on the appliance type/software status,
you must first download this function to your appli-
ance. You can find more information in the
HomeConnect app.
Baking sensor
Some dishes are suitable for cooking with the baking
sensor . You do not have to implement any further
settings.
The baking sensor monitors the baking process in the
cooking compartment. The appliance regulates the set-
tings automatically and ends the operation once the
meal is ready.
Notes
¡ Do not use the baking sensor if the dish is already
pre-baked. The baking result would no longer be
satisfactory.
¡ No longer open the appliance door ap-
prox.5minutes after starting the operation with the
baking sensor. The baking sensor mode stops.
If you have to open the appliance door, restart the
operation afterwards without the cooking sensor or
cancel the operation and set it manually. Monitor the
cooking process until the food is ready.
¡ To achieve an optimal baking result, use dark-col-
oured metal baking tins.
ATTENTION!
Using silicone moulds or any film, covers or accessor-
ies that contain silicone could damage the baking
sensor. Damage may occur even if the baking sensor
is not active.
▶ Do not use silicone moulds or any film, covers or
accessories that contain silicone.
▶ Never place objects made of silicone in the cooking
compartment.
Remaining time forecast for the operation
If your appliance is connected to HomeConnect, the
appliance can forecast the expected remaining time for
the cooking process.
The initial remaining time appears on the display after
approx.1minute. The remaining time is continually re-
calculated and updated.
Dish recognition
Camera-assisted dish recognition starts automatically
after you close the oven door.
Dish recognition detects food in the cooking compart-
ment and suggests suitable appliance settings.
→"Dishes", Page27
To use dish recognition, activate the camera and dish
recognition in the basic settings. Connect your appli-
ance to HomeConnect.
→"Basic settings", Page30
Notes
¡ For dish recognition and to achieve consistently
good results, regularly check the camera lens and
light for dirt and clean, if required.
→"Cleaning the appliance", Page35
¡ Depending on the appliance type/software status,
you must first download this function to your appli-
ance. You can find more information in the
HomeConnect app.
Setting dish recognition
1.
Place the food in the cooking compartment.
To Next Page
Loading...
Need help?
General