Siemens iQ300 HB557JES0Z - Page 12

en Childproof lock
12
4.
When the cooking time has elapsed:
‒ Press any button to end the signal prematurely.
‒ To set another cooking time, press the ⁠button.
‒ When the dish is ready, switch off the appliance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement: is highlighted in the display.
▶
Use the ⁠ or ⁠button to delay the end time.
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end time at any time.
Requirement: is highlighted in the display.
▶
Reset the end time to the current time plus the set
cooking time using the button.
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
off position.
1.
Use ⁠or to set the time.
2.
Press ⁠.
a The time that is set appears in the display.
Tip:You can define whether the time is shown in the
display in the basic settings.
Childproof lock
9 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Notes
¡ The option to set the childproof lock can be activ-
ated in the Basic settings .
¡ After a power cut, the childproof lock will no longer
be active.
9.1 Activating and deactivating the
childproof lock
Requirement:The function selector must be set to the
off position.
▶
To activate the childproof lock, press and hold the
⁠button until ⁠appears in the display.
‒ To deactivate the childproof lock, press and hold
the ⁠button until ⁠goes out in the display.
Basic settings
10 Basic settings
You can configure the basic settings for your appliance to meet your needs.
10.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Clock display = hide the time
= display the time
1
Signal duration upon completion of a
cooking time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
⁠ ⁠ Acoustic signal when a button is
pressed
= off
= on
1
Cooling fan run-on time = short
= medium
= long
1
= extra long
Waiting time until a setting is adop-
ted
= 3 seconds
1
= 6 seconds
= 10 seconds
⁠ ⁠ Childproof lock can be adjusted
→"Childproof lock", Page12
= no
= yes
1
1
Factory setting (may vary according to model)