en Familiarising yourself with your appliance
6
Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models. →Page2
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
4.2 Displays/symbols
The displays show selected values and functions.
Display Name
Operating status
- Heat settings
/ Residual heat
Keep-warm function
PowerBoost function
Timer
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
field
Name
Main switch
PowerBoost function
Hotplate selection
Childproof lock
Wipe protection
Settings range
Activating the dual-circuit hotplate
Activating tri-circuit hotplate
Activating large extended cooking zone
Keep-warm function
Timer
Stopwatch function
Notes
¡ Depending on the operating condition of the hob,
the touch fields that can currently be selected light
up brightly or dimmed. If you touch one of these
fields, the relevant function is activated.
¡ Touch fields which cannot currently be selected do
not light up.
¡ The settings of the hotplates currently selected light
up brightly.
¡ Always keep the control panel dry. Moisture impairs
the function.
¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Hotplates
You can find an overview of the different activations of
the hotplates here.
If you operate the activations, the relevant displays light
up.
If you switch on a hotplate, it will switch to the setting
last selected.
Hotplate Activating and deactivating
Single-circuit
cooking zone
Dual-circuit
hotplate
Touch .
Tri-circuit hot-
plate
¡ Touch .
Second filament circuit is
activated.
¡ Touch .
Second and third filament
circuit are activated.
To Next Page
Loading...
