Siemens iQ500 GS N Series - Troubleshooting Display Issues; Display Panel Information; Super Freezing Issues; Temperature Display Flashing

en Troubleshooting
24
Fault Cause troubleshooting
Automatic Super freezing
does not switch on.
Not a fault. The appliance
decides independently
whether automatic Super
freezing is required, and
switches it on or off automat-
ically.
No action required.
Information on display panel
Fault Cause troubleshooting
or appears in the tem-
perature display.
The electronics have detec-
ted a fault.
▶
Call the after-sales service.
→"Customer Service", Page29
The temperature display
flashes, a warning signal
sounds and lights up.
Different causes are pos-
sible.
▶
Press .
a The alarm is switched off.
The appliance door is open.
▶
Close the appliance door.
The ventilation openings are
covered up.
▶
Remove any obstructions from in
front of the ventilation openings.
Larger quantities of fresh
food have been put in.
▶
Do not exceed the max. freezing ca-
pacity.
→"Freezing capacity", Page18
lights up and appears in
the temperature display.
There has been a power fail-
ure.
▶
Press .