Siemens IQ500 HB 78 C 6B Series - Sabbath Mode; Basic Settings; Home Connect

HomeConnect en
19
Display Basic setting Selection
⁠ ⁠ Button tone when pressing a button = off
= on
1
⁠ ⁠ Brightness of the display illumination = dark
= medium
1
= bright
⁠ ⁠ Time display = hide the time
= display the time
1
⁠ ⁠ Childproof lock can be adjusted = no
= yes
1
= yes, with locked door
⁠ ⁠ Interior lighting during operation = no
= yes
1
⁠ ⁠ Cooling fan run-on time = short
= medium
1
= long
= extra-long
⁠ ⁠ Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
⁠ Sabbath mode available = no
1
= yes
⁠ Automatic rapid heating from 200°C
2
= no
= yes
1
⁠ Reset all values to factory settings = no
1
= yes
.. HomeConnect Settings
→"HomeConnect ", Page19
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
14.2 Changing basic settings
Requirement:The appliance is switched off.
1.
Press and hold the button for approximately
fourseconds.
a The first basic setting appears in the display,
e.g. ⁠ ⁠ ⁠ ⁠.
2.
Use the temperature selector to change the setting.
3.
Use the or button to switch to the next basic
setting.
4.
To save the changes, press and hold the button
for approx. fourseconds.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
14.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a All changes are discarded and not saved.
15 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.