5/24
Building Technologies Division CC1N7153en
21.09.2016
Standards and certificates
Applied directives:
Low-voltage directive 2014/35/EC
Directive for pressure devices 97/23/EC and
2014/68/EC (2016-07-16)
Electromagnetic compatibility EMC
(immunity) *)
2014/30/EC
*) The compliance with EMC emission requirements must be checked after the burner control is
installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels
DIN EN 298
Automatic electrical controls for household and similar use
Part 2-5:
Particular requirements for automatic electrical burner
control systems
DIN EN 60730-2-5
The relevant valid edition of the standards can be found in the declaration of
conformity!
Note on DIN EN 60335-2-102
Household and similar electrical appliances - Safety - Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections. The electrical connections of the LAL and the AGM comply with the
requirements of EN 60335-2-102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
Certified with plug-in base and flame detector:
Type
Only with QRB
LAL1.25
● ● ● ● ● ●
--- ---
LAL2.14
● ● ● ● ● ● ●
---
LAL2.25
● ● ● ● ● ● ● ●
LAL2.65
● ● ● ● ● ● ●
---
LAL3.25
● ● ●
---
● ● ● ●
To Next Page
Loading...
