EasyManuals Logo

Siemens LC97BCP50 User Manual

Siemens LC97BCP50
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Operating the appliance en
7
1Operating the appliance
Oper at i ng the appl i anc e
These instructions apply to several appliance variants.
It is possible that individual features are described
which do not apply to your appliance.
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Control panel
Setting the fan
Switching on
Touch the # symbol.
The fan starts at setting ƒ.
Touch the + or - symbol to alter the fan speed.
Switching off
Touch the # symbol.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the = symbol.
Setting the brightness
Press and hold the = symbol until the desired
brightness is reached.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the @ symbol until 2 is shown on the display
panel.
Note: After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you want to end intensive mode before the preset
time expires, touch the A symbol to select the fan
setting you require.
Boost function
Switching on
Touch the & symbol.
Note: After approximately 20 seconds, the extractor
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the & symbol.
Fan run-on time
Switching on
Touch the x symbol.
The fan will run at fan setting 1.
After approximately 10 minutes, the fan will switch itself
off automatically.
Switching off
Touch the x symbol.
This immediately stops fan run-on.
Symbol Explanation
# Fan on/off
= Light on/off/dimming
A Decrease fan setting
@ Increase fan setting/intensive mode 1, 2
& Boost function (brief period at maximum power)
x Fan run-on
Indicator/
symbol
Explanation
! Metal grease filter saturation indicator
" Activated charcoal filter saturation indicator
1-3 Fan settings
x Fan run-on
2 Intensive mode

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens LC97BCP50 and is the answer not in the manual?

Siemens LC97BCP50 Specifications

General IconGeneral
Noise level55 dB
Intensive speedYes
Number of speeds3
Type of extractionDucted/Recirculating
Noise level (low speed)43 dB
Maximum extraction power690 m³/h
Maximum recirculating power380 m³/h
Noise level (intensive speed)66 dB
Fluid dynamic efficiency classA
Noise level (recirculation mode)70 dB
Grease filtering efficiency classB
TypeWall-mounted
Cord length1.3 m
Control typeTouch
Product colorStainless steel
Built-in displayNo
Exhaust connection diameter150 mm
Bulb typeLED
Bulb power1.5 W
Illuminance373 lx
Number of bulbs3 bulb(s)
Current10 A
Motor power140 W
Connected load145 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Annual energy consumption30 kWh
Number of filters1 pc(s)
Grease filter typeAluminum
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width898 mm
Height628 mm
Weight18400 g
Height (max)1139 mm
Height (min)809 mm
Height without chimney46 mm

Related product manuals