Siemens MC35 Terminal User Manual

Remote-SAT User's Guide
P R E L I M I N A R Y
MC35_SAT_01_V01.01a - Preliminary Page 59 of 64 15.11.2001
7
b8 b7 b6 b5 b4 b3 b2 b1 hex Seventh byte: Multiple card proactive
commands for class "a"
0 0 0 0 0 0 0 0 00 ME Default Profile
Proactive SIM: POWER ON CARD
Proactive SIM: POWER OFF CARD
Proactive SIM: PERFORM CARD APDU
Proactive SIM: GET READER STATUS (Card reader
status)
Proactive SIM: GET READER STATUS (Card reader
identifier)
RFU, bit = 0
8
b8 b7 b6 b5 b4 b3 b2 b1 hex Eighth byte: Proactive SIM
1 1 0 1 1 1 1 1 DF ME Default Profile
Proactive SIM: TIMER MANAGEMENT (start, stop)
Proactive SIM: TIMER MANAGEMENT (get current value)
Proactive SIM: PROVIDE LOCAL INFORMATION (date, time
and time zone)
Binary choice in GET INKEY
SET UP IDLE MODE TEXT
RUN AT COMMAND (i.e. class "b" is supported)
2nd alpha identifier in SET UP CALL
2nd capability configuration parameter (see 9.1.6)
9
b8 b7 b6 b5 b4 b3 b2 b1 hex Ninth byte
0 0 0 1 1 1 1 1 1F ME Default Profile
Sustained DISPLAY TEXT
SEND DTMF command
Proactive SIM: PROVIDE LOCAL INFORMATION
Proactive SIM: PROVIDE LOCAL INFORMATION (language)
Proactive SIM: PROVIDE LOCAL INFORMATION (Timing
Advance)
Proactive SIM: LANGUAGE NOTIFICATION
Proactive SIM: LAUNCH BROWSER
RFU, bit = 0

Siemens MC35 Terminal Specifications

General

Brand	Siemens
Model	MC35 Terminal
Category	Modem
Language	English