Siemens MC35 Terminal User Manual

Remote-SAT User's Guide
P R E L I M I N A R Y
MC35_SAT_01_V01.01a - Preliminary Page 55 of 64 15.11.2001
1.5.3 Event Response Commands
The following types of responses are neither issued in reaction to a formerly given notification (^SSTN)
nor a AT^SSTGI sequence. These responses are intended to report activities at the external
application, e.g. when the user is pressing a key.
1.5.3.1 AT^SSTR Remote-SAT Event Response – Menu Selection (211)
Write command
AT^SSTR=211,
<status>,
< itemId >
The TA specifies a user´s selection of an item from the main menu, that was set
up using SETUP MENU command. Alternatively help can be requested.
Response
OK
Parameters
<cmdType> 211 – Proactive command ID, see Table 1
<status> Unsigned Integer, range 0-255
0 Command performed successfully.
19 Help information required by the user, no other value can
be input.
<itemId> Id of selected item (1-255)
Reference
Siemens
Note
1.5.3.2 AT^SSTR Remote-SAT Event Response – User Activity (232)
Write command
AT^SSTR=232
Sent by the customer application to indicate that a key has been pressed.
Response
OK
Parameters
<cmdType> 232 – Event command ID, see Table 1
Reference
Siemens
Note

Siemens MC35 Terminal Specifications

General

Brand	Siemens
Model	MC35 Terminal
Category	Modem
Language	English