– Select the menu "File" and "Installation of the system on PCU". The TRANSLINE system
is transferred to the selected PCU and installed on the PCU with the HMI PRO setup.
– Select the menu "File" and "Installation of the project on PCU". The TRANSLINE project
is transferred to the selected PCU and installed on the PCU with the HMI PRO setup.
7.2.4 Changing, repairing and uninstalling programs
In an existing client setup, you have the option of changing, repairing or uninstalling
installations.
Procedure
1. Start the PCU in the Windows service mode.
2. Open the installation directory.
3. Start the "setup.exe" setup file by double-clicking.
4. The "Welcome" window opens and offers you the following options:
– Changing the client setup
– Repairing the client setup
– Removing the client setup
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 169
To Next Page
Loading...
Need help?
General
