Siemens Building Technologies
Fire Safety
P/N 315-048692-27
Command Keypad The command keys are described in the following table:
DAPYEKDNAMMOC
yeKesopruP
×
nognihsalfsitahwfotfelehtotmetiehttceleS
.)rebmunagniretnesselnu(yalpsideht
Ø
nognihsalfsitahwfothgirehtotmetiehttceleS
.)rebmunagniretnesselnu(yalpsideht
Ù
.metisuoiverpehtotkcaboG
RETNE
sirosrucehthcihwnometiehttcelesotsserP
otRETNEsserp,srebmunnignipytretfA.gnihsalf
.yrtneehtetelpmoc
PLEH
.egassemenil-enoayalpsidotsserP
TNIRP
.stroperdnastsilsuoiravgnitnirpnigebotsserP
ECAPS
elpitlum"0"tupniotdeenehtetanimileotsserP
,010-100sserddaehttupniot,elpmaxeroF.semit
.RETNEdnaECAPS01ECAPS1retne
RAELC
gnisserpybnugebstuotnirplecnacotsserP
:tnirplliwmetsySehT.TNIRP
.detanimretylerutamerpgnitsilsihT
The ALT and Function Keys Using the four function keys alone or in combination with ALT1 or ALT2 provides a
total of 12 special functions. When using a combination, hold the ALT key down and
then press the function key.
F1 ALT1+F1 ALT2+F1
F2 ALT1+F2 ALT2+F2
F3 ALT1+F3 ALT2+F3
F4 ALT1+F4 ALT2+F4
These keys are defined using the CSG-M Custom Software Generator (See the
CSG-M Programming Manual, P/N 315-090381).
Internal Audible Alarm The internal audible alarm sounds steadily when there is an unacknowledged alarm.
It pulses if all alarms are acknowledged but there is at least one supervisory, trouble,
or security condition.
PRINT and CLEAR Keys If your System includes the printer option, the printer automatically prints System
events. Either an external serial or parallel printer can be connected. To select the
printer port, refer to the CSG-M Programming Manual, P/N 315-090381.
The multi-line display cannot be connected to a TSP-40 strip printer.
The PRINT key is used to print various lists and reports. To cancel the printing at any
time, press the CLEAR key; the System will print the following message:
This listing prematurely terminated.
To Next Page
Loading...
Need help?
General
