To Next PageTo Next PageWhat to do if the PARTIAL SYSTEM DISABLE LED is lit on my Siemens Control Panel?
If the PARTIAL SYSTEM DISABLE LED is illuminated, verify that all necessary detectors are armed. You can use the Control Arm/dis menu to check this.
Lists and describes the essential hardware components of the MXL-IQ.
Essential safety and procedural guidelines before installing the MXL-IQ.
Instructions for installing the MSE-3L enclosure, SMB-2, MPS, and MKB-4.
Guidance on field wiring and the initial system start-up procedure.
Operation of the MKB-4 panel in both local and global modes.
How the system indicates and allows acknowledgment of system events.
Instructions for performing hard and soft resets on the MXL-IQ system.
How to navigate and use the MXL-IQ's menu system for various functions.
Common symptoms, probable causes, and corrective actions for MXL-IQ issues.
Lists and describes the essential hardware components of the MXL-IQ.
Essential safety and procedural guidelines before installing the MXL-IQ.
Instructions for installing the MSE-3L enclosure, SMB-2, MPS, and MKB-4.
Guidance on field wiring and the initial system start-up procedure.
Operation of the MKB-4 panel in both local and global modes.
How the system indicates and allows acknowledgment of system events.
Instructions for performing hard and soft resets on the MXL-IQ system.
How to navigate and use the MXL-IQ's menu system for various functions.
Common symptoms, probable causes, and corrective actions for MXL-IQ issues.
General| Type | Fire Alarm Control Panel |
|---|---|
| Display | LCD |
| Touchscreen | No |
| NAC Outputs | 2 |
| Communication | RS-485, Ethernet (optional) |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Power Supply | 120/240 VAC, 50/60 Hz |
