Siemens MXL-IQ - LIST Menu; Entering the List Menu

3-22
Operation
Press HELP again to return to the previous
display.)
Press ENTER to acknowledge the trouble
shown. The System prints a message
similar to the following message and
removes that trouble from the unacknowl-
edged trouble list:
ACK TROUBLE 36-050 16:11:44 Aug 8, 20XX
#18
[custom message], [trouble type]
[device type]
In the above message, the time and date
are the time and date that the condition was
acknowledged and 36-050 is the address.
The System then displays the next trouble
to acknowledge.
When the System has displayed all of the
unacknowledged troubles, it returns to the
Acknowledge menu.
(To end a menu session and return to the
Main Menu or to leave the menu at any time,
press the Up arrow key to go backward one
menu each time.)
LIST Menu
The List menu has eighteen items from
which to choose; the shortened terms used
in the menu are in parentheses.
You can generate a printed list or report for
every item on the List menu except Node
Address. See the discussion for each item
that follows.
Status
Alarm
Supervisory (Supervsry)
Security
Trouble
Sensitivity (Senstvty)
Voltages
Temp
Module type (Mod type)
Device type (Dev type)
Message
Software version (SW version)
Output states
Device usages
Node address
Air Sampling
Percent/ft
ASD_apps
Use the List menu to learn the following
information:
• Status of the System
• Alarm information
• Supervisory information
• Security information
• Trouble information
• Detector sensitivity
• Detector voltage
Analog
Threshold (Thresh)
Sensitivity (Sens)
• Temperature of FP-11 or FPT-11
• Type of module
• Type of device
• Custom message of the given
address
• Version of the System software
• Output states
• Device usages
• Panel's X-Network node address
• Percent per foot obscuration
Sensitivity
Pre-alarm
Analog
• Device application (ASD setting)
Entering the List Menu
From the Main Menu, use the Left or Right
arrow key to cause the L in List to blink.
If you press HELP at this point, the System
explains the List function:
TO LIST SYSTEM, DEVICE, CSGM INFO
Press HELP again to return to the Main
Menu.