Siemens MXL-IQ - Appendix D: MXL-IQ Power Supply Load Calculations

D-1
Appendix D
Each MXL-IQ System enclosure requires
an SMB-2. To ensure that the power supply
is not overloaded, complete the worksheet
on the following page.
• Enter the quantity of each module in
the enclosure.
• Calculate both the 24V and 5V loads
for each row.
• Total the Active 24V and Active 5V
columns.
• Ensure that both totals are within the
power supply output ratings in the
table to the right.
MXL-IQ Power Supply Load
Calculations
SGNITARTUPTUOYLPPUSREWOP
eludoM
CDV42evitcA
tnerruCeludoM
e
ludoMCDV5evitcA
tnerruC
6-SPM/2-BMSspma6Am005
21-SPM/2-BMSspma21Am005