Siemens Mobile - Connectivity Settings

©
Siemens AG 2003, M:\Mobil\R65\CF62_TMO\en\sug\A65_Setup.fm
Settings50
VAR Language: en; VAR issue date: 040413
left page (50) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)
Connectivity
§Menu§ K
m
KConnectivity
KSelect function.
GPRS b
(General Packet Radio Service)
GPRS is a new method for transmit-
ting data faster in the mobile net-
work.
Data Counter
Display of information on connection
status.
Authentication
E
Activate or deactivate
encrypted WAP dial-up
(CSD connections only).
Data Services
For the MMS, WAP and HTTP applica-
tions at least one connection profile
must be set up and activated.
The default for the phone depends
on each service provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. Current settings
for each service provider can be
found on the Internet under
www.siemens-mobile.com/customercare
in the FAQ section.
I
Select profile.
E
Open menu, then press
Change Settings
If necessary enter CSD settings and
GPRS settings (your service provider
will supply you with information on
this if necessary):
§Options§ Open, select Change Set-
tings
K§Edit§ and enter
data.
§Save§ Save settings.
§Menu§
K
m
KConnectivity
KSelect function.
HTTP Profile
I
Select profile.