EasyManua.ls Logo

Siemens MOBILETT Plus - General Information and Safety; Training and Document Requirements

Siemens MOBILETT Plus
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 - 1
Siemens-Elema AB Register 6 SPR8-215.850.02 Page 1 of 4 MOBILETT Plus/ Plus E
Solna, Sweden Rev. 01 01.02 SPS-UD
General 1
Function Description valid for 1
MOBILETT Plus with serial no. > 3200
MOBILETT Plus E with serial no. > 10900
Documents required 1
Service Instruction SPR8-215.898...
Maintenance Instruction SPR8-215.831...
Maintenance Protocol SPR8-215.832...
Text emphasis 1
Symbols 1
Checks and adjustments that must be performed with radiation ON are identified by the
radiation warning symbol.
This symbol means "Dangerous voltage".
This symbol means "Attention, consult the documentation".
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips.
DANGER
WARNING
CAUTION
NOTICE
NOTE

Other manuals for Siemens MOBILETT Plus

Related product manuals