Need help?Do you have a question about the Siemens PUMA VT1100/M and is the answer not in the manual?
General| Control | CNC |
|---|---|
| Max. Turning Diameter | 1100 mm |
| Spindle Speed | 2000 rpm |
| X-Axis Travel | 1000 mm |
| Z-Axis Travel | 2000 mm |
| Number of Tools | 12 |
| Tool Magazine Capacity | 12 |
| Tool System | VDI |
| Type | Vertical Lathe |
| Spindle Speed Range | 2000 rpm |
| Control System | Siemens 840D |
| Spindle Motor Power | 37/45 kW |
| Spindle Power | 37/45 kW |
Details on how to operate the main power switches, including MCCB handle function.
Procedures for machine readiness and releasing emergency stop states.
Details on machine power requirements, transformer needs, and power ON/OFF steps.
Explains emergency stop functionality and procedures to achieve machine ready status.
Overview of different machine operation modes like AUTO, MDA, TEACH IN, and Manual.
Covers jog traverse, rapid traverse, handle feed, and manual reference point return.
Comprehensive list and explanation of M-codes for machine functions.
How to select tools and activate tool offsets using T-commands.
Explanation of tool data, offsets, and how the control corrects travel paths.
Using S-codes for speed and M3/M4/M5 for rotation direction and stop.
Introduction, basic concepts, TLM programming, and setup steps.
Procedures for NC/PLC initialization, encoder referencing, and adjustment.
To Next Page