MAINTENANCE | 123
1.2 This is how you make a new entry in the logbook
(1) Generating a new logbook entry
In order to log service and diagnostic procedures at the machine, make an entry in the
Machine logbook. The activities performed are logged here after each service call.
To make a logbook entry, proceed as follows:
1) Select the "Diagnostics" operating area.
2) Press the "Version" soft key.
3) Press the "Logbook" soft key.
4) Press the "New entry" soft key in order to make an entry in the logbook.
Complete the fields for the new logbook entry:
Editing the logbook
To Next Page
Loading...
