124 | Part 4
5) Press the "OK" soft key to save an entry in the logbook.
For the following activities, two additional soft keys are available, which generate
preconfigured
Logbook entries:
① Commissioning completed
② Commissioning completed
Once saved, data can no longer be changed.
1.3 This is how you save the machine identity
(1) Saving the machine identity
Note
Ensure that the machine identity that has been entered is correct before saving in order
that no incorrect information is saved. In order to save the machine identity (address
data, version data and logbook) externally on a data carrier, proceed as follows:
1) Select the "Diagnostics" operating area.
2) Press the "Version" soft key.
3) Press the "Save" soft key.
The "Save version information: Select Archive" window opens. Select a directory.
4) Press the "OK" soft key.
To Next Page
Loading...
