Need help?Do you have a question about the Siemens Sentron 7KN POWERCENTER 1000 and is the answer not in the manual?
General| Type of display | LCD |
|---|---|
| Mounting type | DIN rail |
| Protection class IP | IP20 |
| Number of digital outputs | 2 |
| Frequency | 50 / 60 Hz |
| Degree of protection | IP20 |
| Product designation | POWERCENTER 1000 |
| Voltage type | AC |
| Type of electrical connection | screw-type terminals |
| Standards | IEC 60947 |
Lists relevant documents and their article numbers for further information.
Provides information on how to find further support on the Internet.
Information on training courses offered for industry professionals.
Details on industrial security functions and best practices for secure operation.
Information regarding the use and licensing of third-party open-source software components.
Guidance for customers on using mobile devices securely with the system.
Defines the five essential safety rules for working on electrical systems.
Details on the 7KN POWERCENTER 1000 data transceiver, the core of the system.
Description of the 5ST3 COM add-on module for communication and metering.
Information on the 5SL6 COM miniature circuit breaker with communication features.
Details on the 5SV6 COM arc fault detection device with communication.
Information about the 3NA COM fuse with communication and metering function.
Covers initial steps like checking delivery, device identification, and installation conditions.
Instructions for mounting devices on DIN rails and connecting them.
Details on device interfaces (Ethernet, Bluetooth), operation, and LED signaling.
Covers app-based, PC-based, and multi-device commissioning procedures.
Includes removing devices, fuse summaries, import/export, time-outs, and software usage.
Details measured values, their accuracy, transmission frequency, and storage.
Describes device messages, limit violations, and tripping operations.
Covers time sync via SNTP and Modbus TCP communication details.
Illustrates how to connect devices to systems like powermanager, IoT concentrators, and cloud platforms.
Information on warranty obligations and the exemption from repairs.
Guidance on updating the firmware for SENTRON circuit protection devices.
Instructions for the proper disposal of electronic waste according to regulations.
Troubleshooting common errors encountered during the commissioning process.
Solutions for issues related to Modbus TCP communication.
Troubleshooting steps for problems encountered during firmware updates.
Detailed technical specifications for the 7KN Powercenter 1000 device.
Technical specifications for the 5ST3 COM auxiliary switch and fault signal contact.
Technical specifications for the 5SL6 COM miniature circuit breaker.
Technical specifications for the 5SV6 COM arc fault detection device.
Technical specifications for the 3NA COM fuse.
Dimensional drawings and measurements for the 7KN Powercenter 1000.
Dimensional drawings and measurements for the 5ST3 COM device.
Dimensional drawings for 5SL6 COM and 5SV6 COM devices.
Dimensional drawings and measurements for the 3NA COM fuse.
Schematic circuit diagram for the 7KN Powercenter 1000.
Schematic circuit diagram for the 5ST3 COM auxiliary switch.
Schematic circuit diagram for the 5SL6 COM miniature circuit breaker.
Schematic circuit diagram for the 5SV6 COM arc fault detection device.
Schematic circuit diagram for the 3NA COM fuse.
Information on handling ESD-sensitive components and protective measures.
A list of abbreviations used in the manual and their meanings.
To Next Page