To Next PageTo Next Page
Need help?Do you have a question about the Siemens SENTRON VL 160 and is the answer not in the manual?
General| Rated Current | 160 A |
|---|---|
| Rated Voltage | 690 V AC |
| Standards | IEC 60947-2 |
| Number of Poles | 3 |
| Protection Class | IP20 (with terminal covers) |
| Trip Unit Type | Thermal-magnetic |
| Mounting | Fixed |
| Connection Type | Screw terminals |
Covers hazardous voltage warnings and essential safety measures.
Provides contact information for technical support and assistance.
Lists the necessary tools for the correct installation of the unit.
Illustrates the physical assembly process and option installation.
Interface for choosing the display language.
Entry points for protection, password, and option settings.
Flowchart detailing primary navigation paths within the menu.
Paths for accessing optional features and test functionalities.
Access to display protection settings and system status information.
Details on device hardware, serial number, and software version.
Functions to modify protection parameters and ZSI configurations.
Managing communication addresses, language, and user passwords.
Detailed settings for current thresholds and time delays.
Configuration of ground fault protection and thermal memory features.
Access to view system status and communication address details.
Information and testing for zone selective functions.
Configuration of various zone selective protection modes and methods.
Modifying communication addresses and user passwords.
Adjusting settings for current values and time delays.
Configuration of ground fault and pre-alarm parameters.
Accessing protection and system related data.
Details on communication addresses and interface status.
Configuration options for various zone selective functions.
Settings for communication addresses and user interface language.
Detailed steps for modifying current and time delay parameters.
Adjusting ground fault and thermal memory settings.
Access to view protection settings and overall system status.
Information on communication addresses and zone selective functions.
Options to modify protection parameters and zone selective functions.
Settings for communication addresses and user interface language.
Procedures for adjusting current, time, and mode settings.
Adjusting ground fault and pre-alarm related parameters.
Access to protection settings and system status information.
Details on communication addresses and zone selective functions.
Options for modifying protection and zone selective settings.
Settings for communication addresses and user interface language.
Workflow for adjusting current and time-related protection parameters.
Adjusting ground fault, thermal memory, and pre-alarm settings.
Links to further information and manuals available online.
Information regarding technical changes and copyright notices.
