Siemens Sentron 7KN POWERCENTER 1000 - 5 ST3 COM Auxiliary Switch Specifications

Technical specifications
10.2 5ST3 COM auxiliary switch and fault signal contact
Circuit protection devices with communication and metering function
88 System Manual, 06/2021, L1V30827018B-01
10.2 5ST3 COM auxiliary switch and fault signal contact
Designation
Value
Order number
5ST30620MC
Product name
5ST3 COM auxiliary switch / fault signal contact
Operating voltage rated value
24 V DC (SELV)
Design of the product factory fitted
No
Available measurement data
Manual ON/OFF, tripping operation, temperature, switching
cycles, operating hours, warnings
Product expansion can be mounted
universal (LS, FI, FI/LS, AFDD ON/OFF 5TL1 remote operating
mechanism)
Number of modular width units
0.5
Product component auxiliary switch
Yes
Product component fault signal contact
Yes
IP degree of protection
IP20
Reference ID in accordance with IEC 81346-2:2009
SF
Maximum operating voltage for DC
28.8 V
Minimum operating voltage for DC
19.2 V
Power loss [V_A] during standby
0.5 W
Maximum current consumption
20 mA
Terminal type
screwless
Maximum connectable conductor cross-section
1.5 mm
2
Minimum connectable conductor cross-section
0.2 mm
2
Type of connectable conductor cross-sections with AWG
cables
24 ... 16
Implementation of the LED display
Yes
Typical electrical endurance (operating cycles)
10000
Maximum permissible ambient temperature during storage
85°C
Minimum permissible ambient temperature during storage
-40°C
Minimum ambient temperature during operation
-25°C
Maximum ambient temperature during operation
60°C
Height
90 mm
Width
9 mm
Depth
76.3 mm
Net weight
28.5 g
Radio regulations EU
2014/53/EU
Radio transmission frequency
2400 - 2483.5 MHz
Radio transmission power
2.5 dBm