Siemens Sentron 7KN POWERCENTER 1000 - 5 SL6 COM Miniature Circuit Breaker Specifications

Technical specifications
10.3 5SL6 COM miniature circuit breaker
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01
89
10.3 5SL6 COM miniature circuit breaker
Designation
Value
Order number
5SL60xx-yMC (xx = 02, 04, 06, 08, 10, 13, 16, 20, 25, 32; y
= 6 or 7)
Product name
5SL6 COM compact miniature circuit breaker
Tripping characteristic class
B and C
Operational current for AC rated value
2 A, 4 A, 6 A, 8 A, 10 A, 13 A, 16 A, 20 A, 25 A, 32 A
Supply voltage for AC rated value
230 V
Breaking capacity current acc. to EN 60898 rated value
6 kA
Available measurement data
voltage, current, active power, apparent power, reactive
power, active energy, line frequency, power factor, tempera-
ture, switching cycles, operating hours, tripping operation,
warnings
Energy limiting class
3
Minimum connectable conductor cross-section, solid
0.75 mm
2
Maximum connectable conductor cross-section, solid
16 mm
2
Minimum connectable conductor cross-section, stranded
0.75 mm
2
Maximum connectable conductor cross-section, stranded
16 mm
2
Minimum connectable conductor cross-section, finely
stranded with end sleeve
0.75 mm
2
Maximum connectable conductor cross-section, finely
stranded with end sleeve
10 mm
2
Minimum tightening torque
1.2 Nm
Maximum tightening torque
2 Nm
Product expansion can be installed
Yes
Number of poles
1P+N
Product function with switching neutral conductor
Yes
IP degree of protection
IP20, with connected conductors
Pollution degree
2
Overvoltage category
III
Number of modular width units
1
Minimum ambient temperature during storage
-40°C
Maximum ambient temperature during storage
75°C
Maximum ambient temperature during operation
60°C
Minimum ambient temperature during operation
-25°C
Ambient temperature with 95% relative air humidity
60°C
Number of test cycles for environmental testing in accord-
ance with IEC 60068-2-30
28
Insulation voltage for AC rated value
250 V
Impulse withstand voltage, rated value
4000 V
Minimum operating voltage
195 V
Maximum operating voltage with single-phase operation
with AC
253 V
Insulation voltage with single-phase operation with AC rated
value
250 V
Mounting type
DIN rail
Reference ID in accordance with IEC 81346-2:2009
F