Pre-installation Instructions
Multimobil 5C
Siemens Ltd. Med India Version 5.0 Page 11 of 11
Copyright © SIEMENS LTD. All rights reserved. For internal use only
1.7 Installation Of The Monitors
1) Open the corrugated box and remove the monitors.
2) Open the accessories box and remove the packet of hardware.
3) Place the monitors on the top tray of the monitor trolley and fasten them using
socket HD screw M4x20, spring washer and plain washers.
4) Make use of the connector provided on the monitor trolley for providing power supply
to the monitors.
5) Ensure that the radiation indication lamp is available on the Monitor Trolley.
To Previous Page
Loading...
